ORA_CLIENT_IP_ADDRESS函数的功能是以VARCHAR2类型返回客户端IP地址,一般只用在系统触发器中,其实它也只在系统触发器中有效.经常
ora_client_ip_address函数的功能是以varchar2类型返回客户端ip地址,一般只用在系统触发器中,其实它也只在系统触发器中有效.
经常看到有人说使用ora_client_ip_address获得的ip为空,大概也是这个原因造成的.
这里采用ddl触发器和系统触发器做对比.
首先准备实验用的表及两个触发器对象(一个ddl触发器,一个系统触发器)
--建立记录表
23:37:15 SYS@orcl> create table t01(id number,nn varchar2(40));
Elapsed: 00:00:00.05
--建立系统触发器
23:37:53 SYS@orcl> create or replace trigger ORA_TEST
23:38:16 2 after logon ON database
23:38:16 3 BEGIN
23:38:16 4 dbms_output.put_line(ORA_LOGIN_USER||'IP:'||NVL(ORA_CLIENT_IP_ADDRESS,'AA'));
23:38:16 5 insert into t01 select nvl(max(id),0)+1,ORA_LOGIN_USER||'[system Trigger]IP:'||NVL(ORA_CLIENT_IP_ADDRESS,'AA') from t01;
23:38:16 6 end;
23:38:17 7 /
Elapsed: 00:00:00.05
--建立DDL触发器
23:38:19 SYS@orcl> create or replace trigger ORA_TEST_ddl
23:38:38 2 after ddl ON database
23:38:38 3 BEGIN
23:38:38 4 dbms_output.put_line(ORA_LOGIN_USER||'IP:'||NVL(ORA_CLIENT_IP_ADDRESS,'AA'));
23:38:38 5 insert into t01 select nvl(max(id),0)+1,ORA_LOGIN_USER||'[DDL Trigger]IP:'||NVL(ORA_CLIENT_IP_ADDRESS,'AA') from t01;
23:38:38 6 end;
23:38:38 7 /
Elapsed: 00:00:00.11
其中特别加了ORA_LOGIN_USER来标识登录的用户,以及DDL Trigger和system Trigger字串来标识触发的是哪个触发器.
--先测试系统触发器,发现dbms_output.put_line没有输出
00:06:11 @orcl> conn cry/cry
Connected.
00:09:28 CRY@orcl> conn scott/tiger
Connected.
00:09:37 SCOTT@orcl> conn sys/ as sysdba
Connected.
此时的表t01为
00:09:40 SYS@orcl> select * from t01;
ID NN
---------- ----------------------------------------
1 CRY[system Trigger]IP:192.168.123.102
2 SCOTT[system Trigger]IP:192.168.123.102
3 SYS[system Trigger]IP:192.168.123.102
Elapsed: 00:00:00.02
