1.将nginx安装包拷贝到/opt/nginx目录下,修改权限,解压缩,同时编译安装.
root@iZ25n0utdnmZ:/opt/nginx# chmod 777 nginx-1.9.3.tar.gz
root@iZ25n0utdnmZ:/opt/nginx# ls -l
total 848
-rwxrwxrwx 1 root root 864430 Aug 318:37 nginx-1.9.3.tar.gz
root@iZ25n0utdnmZ:/opt/nginx# tar -zxvf nginx-1.9.3.tar.gz
root@iZ25n0utdnmZ:/opt/nginx/nginx-1.9.3# ./configure
......(很多输出)......
checking for PCRE libraryin /usr/include/pcre/ ... not found
checking for PCRE libraryin /usr/pkg/ ... not found
checking for PCRE libraryin /opt/local/ ... not found
./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using --with-pcre=<path> option.
提示缺少pcre,下载pcre并拷贝到/opt/pcre目录下,修改权限,解压缩,同时编译安装,
root@iZ25n0utdnmZ:/opt/pcre# chmod 777 pcre-8.37.tar.gz
root@iZ25n0utdnmZ:/opt/pcre# ls -l
total 1996
-rwxrwxrwx 1 root root 2041593 Aug 518:31 pcre-8.37.tar.gz
root@iZ25n0utdnmZ:/opt/pcre# tar -zxvf pcre-8.37.tar.gz
root@iZ25n0utdnmZ:/opt/pcre/pcre-8.37# ./configure
root@iZ25n0utdnmZ:/opt/pcre/pcre-8.37# make
root@iZ25n0utdnmZ:/opt/pcre/pcre-8.37# make install
安装完pcre后,继续安装nginx.
root@iZ25n0utdnmZ:/opt/nginx/nginx-1.9.3# ./configure
......(很多输出)......
checking for sha1 in system md library... not found
checking for sha1 in system OpenSSL crypto library... not found
checking for zlib library... not found
./configure: error: the HTTP gzip module requires the zlib library.
You can either disable the module by using --without-http_gzip_module
option, or install the zlib library into the system, or build the zlib library
statically from the source with nginx by using --with-zlib=<path> option.
提示缺少zlib,下载zlib并拷贝到/zlib/zlib目录下,修改权限,解压缩,同时编译安装,
root@iZ25n0utdnmZ:/opt/zlib# chmod 777 zlib-1.2.8.tar.gz
root@iZ25n0utdnmZ:/opt/zlib# ls -l
total 560
-rwxrwxrwx 1 root root 571091 Aug 518:39 zlib-1.2.8.tar.gz
root@iZ25n0utdnmZ:/opt/zlib# tar -zxvf zlib-1.2.8.tar.gz
root@iZ25n0utdnmZ:/opt/zlib/zlib-1.2.8# ./configure
root@iZ25n0utdnmZ:/opt/zlib/zlib-1.2.8# make
root@iZ25n0utdnmZ:/opt/zlib/zlib-1.2.8# make install
安装完zlib后,继续安装nginx.
root@iZ25n0utdnmZ:/opt/nginx/nginx-1.9.3# ./configure
Configuration summary
+ using system PCRE library
+ OpenSSL library is not used
+ using builtin md5 code
+ sha1 library is not found
+ using system zlib library nginx path prefix: "/usr/local/nginx"
nginx binary file: "/usr/local/nginx/sbin/nginx"
nginx configuration prefix: "/usr/local/nginx/conf"
nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
nginx pid file: "/usr/local/nginx/logs/nginx.pid"
nginx error log file: "/usr/local/nginx/logs/error.log"
nginx http access log file: "/usr/local/nginx/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp"
root@iZ25n0utdnmZ:/opt/nginx/nginx-1.9.3# make
root@iZ25n0utdnmZ:/opt/nginx/nginx-1.9.3# make install
注意:ginx默认是在安在/usr/local/nginx下.
2.启动,重启和停止nginx.
root@iZ25n0utdnmZ:/usr/local/nginx/sbin# ./nginx
root@iZ25n0utdnmZ:/usr/local/nginx/sbin# ./nginx -s reload
root@iZ25n0utdnmZ:/usr/local/nginx/sbin# ./nginx -s stop3.nginx和tomcat集成配置.
打开nginx的配置文件nginx.conf,在其中加入如下配置:参考配置1.conf.
location ~ \.mvc {
proxy_pass http://101.201.89.5:8080;
}
其中重要的配置如下:
server {
listen 80;
server_name localhost;
location ~ \.mvc {
proxy_pass http://101.201.89.5:8080;
}
}
这段配置的意思是:服务器监听80端口,当有以.mvc结尾的请求时,服务器将请求交给代理处理.其余配置先不做详细介绍.
注意可以使用nginx -t指令校验配置文件配置的是否正确.
root@iZ25n0utdnmZ:/usr/local/nginx/sbin# ./nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
4.nginx和tomcat负载均衡配置.
打开nginx的配置文件nginx.conf,在其中加入如下配置:参考配置2.conf.
upstream myserver {
server 101.201.89.5:8080 weight=1;
server 101.201.89.5:8081 weight=1;
}
server {
listen 80;
server_name localhost;
location ~ \.mvc {
proxy_pass http://myserver;
}
}
这段配置的意思是:服务器监听80端口,当有以.mvc结尾的请求时,服务器将请求交给代理处理,而代理指向的是一个服务器列表,通过upstream配置,
通过名字myserver匹配,在服务器列表中有两个服务器,端口分别是8080,8081,权重都是1,即nginx会将发过来的请求按1:1的比例交给两个服务器处理,
注意:如果某个服务器瘫痪了或者根本不存在,也不会影响业务,另一个服务器会处理所有请求.
另一个tomcat的server.xml文件配置需要修改的地方如下:
将8005改为8006:<Server port="8006" shutdown="SHUTDOWN">
将8080改为8081:<Connector port="8081" protocol="HTTP/1.1" c>"20000" redirectPort="8443" />
将8009改为8010:<Connector port="8010" protocol="AJP/1.3" redirectPort="8443" />
如果两个服务都正常运行,可以通过记录log测试两个服务分别处理了不同的请求,如下:
log4j.appender.file.File=/log/tomcat1/aplay-web.log
log4j.appender.file.File=/log/tomcat2/aplay-web.log
版权声明：本文为博主原创文章，未经博主允许不得转载。
HTShop网上购物系统
下载
HTShop网上购物系统由恒天网络科技有限公司根据国际先进技术和国内商务特点自主版权开发的一款具有强大功能的B2C电子商务网上购物平台。HTShop以国际上通用流行的B/S(浏览器/服务器)模式进行设计，采用微软公司的ASP.NET（C#）技术构建而成。 2007-11-10 HTShop CS 通用标准版 v1.1.11.10 更新内容自由更换模版功能开放 修改了购买多款商品，会员中心订单只显示
以上就介绍了服务器搭建2，包括了方面的内容，希望对PHP教程有兴趣的朋友有所帮助。
